Marine Valves in Abu Dhabi
Seawater, ballast, bilge and fuel lines need valves that match the vessel's original standard. We supply marine valves to JIS, DIN and ANSI patterns for ship repair yards, vessel operators and offshore contractors working out of Musaffah, ICAD and the Abu Dhabi ports.
What we supply
- Bronze and cast iron gate valves
- Globe and angle valves
- Swing check and lift check valves
- Storm valves
- Butterfly valves
- Screw-down non-return valves
Materials & standards
- JIS F 5K / 10K / 16K
- DIN
- ANSI / ASME
- Bronze, cast iron, cast steel bodies
Choosing the right marine valves
Most valves on board are replaced like for like, so the first job is to identify the standard the vessel was built to. Japanese-built ships usually carry JIS F valves, rated 5K, 10K or 16K, with flange dimensions that do not match DIN or ANSI. European yards often use DIN PN10 or PN16, and American-built or offshore equipment tends to follow ANSI/ASME Class 150 or 300.
Body material follows the service. Bronze is the usual choice for seawater cooling, ballast and fire lines because it resists corrosion. Cast iron and cast steel are common on fuel, lube oil, bilge and fresh-water systems. Storm valves and screw-down non-return valves protect overboard discharges, and butterfly valves save space and weight on larger lines.
We help match the replacement to the original, and we can quote alternatives in a different standard where an exact match is not available, with the differences explained so your superintendent can decide.
What to send us for a fast quote
- Valve type (gate, globe, check, butterfly, storm)
- Standard and rating (for example JIS 10K, DIN PN16, ANSI 150)
- Nominal size (for example 50A / DN50 / 2")
- Body material and end connection (flanged, threaded, wafer)
- A photo of the nameplate or the old valve, if you have one
- Vessel name and any class or certificate requirement
Email it to [email protected], use the quote form, or send it on WhatsApp.
Questions
Which valve standards do you supply?
JIS, DIN and ANSI patterns. Send us the size, pressure rating, body material and end connection, or a photo of the old valve's nameplate, and we will match it.
Can you supply valves with certificates?
Ask for the certificate you need (for example a mill or class certificate) with your enquiry, and we will confirm what is available for that item.
Is a JIS 10K flange the same as ANSI 150?
No. The bolt circle, number of bolts and bolt size differ, so the two do not bolt together. Tell us the original standard and we will match it.